Ultrabender PRO
The Ultrabender PRO is equipped with 12 flexible cutting tools that allow not only straight cuts and (small) noses but also (micro) perforations and cut-crease combinations of different widths and heights.
In addition, Ultrabender PRO can produce bridges of various widths and depths. The height of the cut-crease combination or bridge is already adjustable before processing, the width in turn by multi-punch.
Besides, Ultrabender PRO has a lock cut (dove tail tool), stripping forks and special tools for inner crease and bottom punch.
Shape broach
- V – for sharp angles and tiny arcs
- Flat – for "T"-joint and small arcs
- Side – for "T"- and arc joints
Additional functions
- bottom mark
Supported rule heights
- up to 60mm 3-pt
- up to 40mm 4-pt
Supported label rules:
- 7 – 12mm height, 0.4, 0.45, 0.5mm thicknesses
Please note that customized tooling is always required.
The advantage: High length accuracy
Ultrabender PRO allows rounded arcs at the start bends and small arcs in accurate shape. By adjusting the depth of broaching, the radius of the angle can be influenced up to 0.6 mm. In addition, Ultrabender PRO has a ball-screw feeding and offers the possibility of "two-step cutting", which means that the rule is not separated in the machine after cutting.
Unique selling points (USPs)
- side broaching in line (patented unique function) – please refer the detailed broaching description
- 2-in-1: bending and cutting machine
- cutting rules and creasing rules processing simultaneously
- best price performance ratio
Ultrabender ECO
The Ultrabender ECO cutting tools allow straight or nose cut, accurate notching as well as the perforation and shape broach of your rules, too. In addition, the processing system has a smaller bending head for faster tool changing, simple and replaceable male and female cutting blocks for reducing tool resharpening costs and a single or quad-nicking system.
Compared to Ultrabender PRO
- limited number of cutting tools: 4 pieces
- supported rule height 7-50 mm
- no 4-pt possible
- no dual or side broaching
FutureCAM software
- in-house development, supervised by Mr. WU
- high flexibility
- free upgrades
- off-line concept via network access: rule selection off-line by multiply licenses
- full CAD functionality module
- real time machine control funcion – enables easy troubleshooting
- global / single production mode
- Windows 8 & 10 operating systems